Cooperation

Banner
Banner

БКУ

Banner

Нефтемаш

Banner
Banner
Banner

CROWN BLOCKS Print

Кронблок – неподвижная часть талевой системы – устанавливается на кронблочную площадку вышки. 

 


Crown block is a stationary part of the travelling system, it is installed on the crown block platform of the derrick.

Purpose:
- suspending of tools or casings;
- round-trip and process operations during well drilling.

Construction:
- frame;
- sheaves sections;
- sheaves assembly
- auxiliary sheaves.

   Sheaves sections consists of axes installed on the bearings, clamped on the axis, locked by a screw, followed by installation of cotter-pins into the nut slot. At the top, the sheaves sections are covered by guards.
   The sheaves sections axis in the split supports of the frame are fixed against rotation by a plug.
The sheaves on the bearings are fixed by spring rings. For each sheave, there are lubricators for lubrication of the bearings covered with caps on each side on the axis faces. It is necessary to lubricate the bearings with Litol 24 as per GOST 21150-87 and to watch out that there is no excess heat of the bearings, because the lubricant loses its properties at the temperature above 1000С.
   To the crown block frame, the blocks for the wire auxiliary blocks for wire, coming from the auxiliary drawworks or from the special devices, are hanging. The upper end of the guide is also fixed to the frame of the crown block of the top drive system. The crown blocks are of 200 to 600 ton load capacity. The crown block is installed on the derrick before its erection.

Parameters

Crown block type

UKB-5-160

UKB-5-200

UKB-6-250

UKB-6-250 for MDR

UKB-6-270

UKB-6-300

UKB-6-325

UKB-6-400

UKB-7-400

UKB-7-500

UKB-7-540

Maximum hook load, kN

1600

2000

2500

2500

2700

3000

3250

4000

4000

5000

5400

Grooves for line diameter, in

1-1/8

1-1/8

1-1/8

1-1/8

1-1/4

1-1/4

1-1/4

1-3/8

1-3/8

1-3/8

1-1/2

Sheave outside diameter, in

28.34

44.09

39.37

39.37

39.37

44.09

44.09

55.11

55.11

55.11

55.11

Sheave groove bottom diameter, in

24.4

40.15

35.4

35.4

35.4

40.15

39.76

50.59

50.59

50.59

50.59

Pin diameter, in

5.51

8.66

8.66

8.66

8.66

8.66

8.66

11.02

11.02

12.0

11.02

Sheave bearings

42228

42244

97744 LМ

97744 LМ

6-42244

97744 LМ

97744 LМ

7097156 М

7097156 М

F-576041, TR2 FAG

7097156 М

Dimensions, in

 

 

 

 

 

 

 

 

 

 

 

length

88.58

91.33

125.19

114.96

52.0

173.03

125.59

170.66

169.88

165.94

170.47

width

70.27

56.69

90.55

94.68

91.33

118.11

121.25

118.11

125.59

125.98

151.18

height

71.65

52.04

52.55

96.85

56.69

214.56

87.79

228.58

187.08

285.15

218.70

Weight, lbs

3924

7098

8950

10295

22696

16358

13205

22046

21495

32738

25926

 

 


© ООО «Уралмаш НГО Холдинг»        Phone: (495) 783-05-67       Fax: (495) 783-05-68        E-mail: info@uralmash-ngo.com


 
 
 
 
Create & Design: Dipolle Art